Blu-bathworks LF1062 User Manual download pdf (Page 2)

2014-01

1 866 907 0122 blubathworks.com

Installation Requirements

Please read the instructions carefully so as to avoid any damage to the ﬁxture.

1. To ensure this product is installed properly, you must read and follow these guidelines.

2. The owner/user of the product must keep this information for future reference.

3. Consult local building codes to make sure the installation complies with standards.

4. Remove the unit from its packaging. Before disposing of it, inspect the unit to make sure its in good shape. Should

inspection reveal any damage or defect in the ﬁnish, contact your distributor. The warranty does not cover damages

or defects in the ﬁnish once it has been installed. Blu Bathworks’ responsibility for shipping damages ceases upon

delivery of the product in good order to the carrier. All complaints regarding damage due to transport must be made

directly to the carrier.

5. Place the unit in the bathroom before you start working. Conserve all nuts and bolts.

6. To protect the unit during installation, we recommend that you lay a piece of cardboard on the bottom.

7. If the unit is covered with polyethylene protective ﬁlm, do not remove until installation is complete to grant maximum

protection. However, remove ﬁlm where any two surfaces will be in permanent contact.

8. Verify that all dimensions on the plan are the same as the ones of the unit.

9. All installations must conform to local and national plumbing, building and ﬁre codes.

10. Inspect this product to assure you have all parts required for proper installation.

Attention

DO NOT USE IN-TANK BOWLCLEANERS.

The use of high concentration of chlorine or chlorine-related products can seriously damage ﬁttings in the tank. This

damage can cause leakage and property damage. Blu shall not be responsible or liable for any tank ﬁtting failure or

damage caused by the use of in-tank bowl cleaners.

Operation (Note to Owner)

You have chosen a Blu product that is superior in quality and craftsmanship. Our toilet ﬂushing systems are the best in

the industry. To ensure that your toilet is performing correctly, always ﬂush the toilet with a full stroke of the trip lever to

activate the ﬂushing cycle. A full stroke will guarantee that you are ﬂushing with the power of a Blu.

Cleaners for Fittings and Accessories

To avoid damaging the surface and working components of the ﬁttings, certain precautions must

be taken in terms of usage and subsequent cleaning as many cleaning agents contain acids for

general cleaning and removing calcium deposits. When caring for your ﬁttings and accessories,

please note the following:

- Only apply cleaners which are expressly intended for the use

- Never use any cleaner containing hydrochloric acid, formic acid or acetic acid on or near the ﬁtting, as they can

cause considerable damage even with just one application

- Do not use cleaners containing phosphoric acid

- Do not use cleaners containing chlorine bleach solutions

- Never mix or combine cleaning agents

- Abrasive cleaners and unsuitable scouring agents such as scouring pads.

1 2 3 4 5 6 7 ... 13 14

No comments

Blu-bathworks LF1062 User Manual Page 2